December & January are set to be one of the busiest times for our waste & recycling industries, with tonnes and tonnes of extra waste being produced. We have compiled a selection of our front-to-rear and side-to-side load covering solutions, designed especially for the waste sector. All have been designed with the carrier & application in mind. Whether you are carrying domestic waste, wood or metal, there is a system that can handle the task.
Skiploader Load Covering Systems
Our fully automated skip covering solution. Fully bolt-on, simple to install and operate. We have designed the system to covers all bin sizes, powered by our hard working reliable 24v Motor & operated either in cab, via a waterproof switch or remote control. Strong steel arms extend the tarp over the load and seal it both sides. Lifetime spring warranty ensures your loads are covered, time and time again with zero downtime. Tower option available for higher loads.
Available as manual or semi-automatic – the system is very simple to install and easy to operate. The tower rises to over 2.5M allowing the tarpaulin to travel over high loads. Our sprung loaded Rollerbar or 24v Motor extend and retract the tarpaulin as the operator guides the tarpaulin over the load with our robust and reliable rope assembly. An economic and reliable solution that won’t let you down.
Our famous front-to-rear hydraulic load covering system for hook loaders. The system has been designed to extend widthways – travel to the rear of the bin and allow the operator to affix the tarpaulin in a suitable place. Once secure, the system then travels back to the front of the bin, before retracting inwards, ensuring everything is within the vehicle width during travel. A full range of tarpaulin options are available including our super-strong PowerMesh. Simple to operate with full installation guidance available including on-site fitting.
Our standard front-to-rear system, designed to cover cable lifts, hook loaders and trailers. Hydraulically powered to extend the tarpaulin to the rear of the bin from our sprung loaded Rollerbar. The robust steel arms ensure your load is covered safely and securely. Our full range of tarpaulin options are available, suitable for any application. Economic, strong and reliable.
Available as manual or semi-automatic – the system is very simple to install and easy to operate. The tower rises to almost 5M, allowing the tarpaulin to travel over high loads. Our sprung loaded Rollerbar or 24v Motor extend and retract the tarpaulin as the operator guides the tarpaulin over the load with our robust and reliable rope assembly. An economic and reliable solution that won’t let you down.
Trailer Load Covering Systems
The T3T TrailerCover is our strong front-to-rear trailer load covering system. We manufacture the system in-house using strong aluminium extruded arms which are extended by our lifetime warranty spring assemblies. Powered by a 12 or 24v Motor, it has been built to cover up to 12M tipping trailers. The system can be operated from the safety of the cab or using a waterproof switch or remote control – covering the load in under 25 seconds. Lightweight, easy to install while simple and safe to operate. Tower version also available.
Our powerful side load covering system, available in hydraulic or manual. The system covers using front and rear lids, which carry the tarpaulin or netting over the load, concealing it completely. The Lids can be operated using hydraulic valves or our easy to use manual handles. Cost effective and durable, suitable for bins up to 14m.